New exclusive formula: High performance: repositionable for up to 15 seconds.Solvent-free and low odour.Non-drip gel formula.Ultra strong bond. Can be used on metal, most plastics**, wood, paper, cardboard, rubber, leather fabric, ceramics and porcelain. Limitations of use:**Except polyethylene and polypropylene - for these plastics use Loctite All Plastics. Not suitable for repairing items that contain hot liquids (e.g. cups mugs etc.) or items that will be continuously wet in service. For interior use only. Leather may become hardened or discoloured. Not suitable for very soft leather. WARNING: READ INSTRUCTIONS CAREFULLY. HOLD AWAY FROM THE BODY DURING USE. USE IN A WELL VENTILATED AREA. PROTECT CLOTHING AND SURROUNDING AREA. SQUEEZE TUBE GENTLY. Ensure surfaces to be bonded are clean, dry and close fitting.Lightly dampen porous surfaces. Screw nozzle onto tube to pierce. Unscrew cap. Apply a tiny amount of Loctite Superglue to one surface only. Put surfaces together, reposition if necessary and hold for at least 30 seconds. Allow at least one hour before use, and check well bonded. After use: Before replacing cap, lightly sap the base of the tube on a flat surface to empty the nozzle. Wipe nozzle with a tissue dipped in Loctite Glue Remover or nail varnish remover. Replace cap and store upright in a cool dry place.